Computers are a way of life. It is truly an annoying way to start your day- you press the power button and your PC won’t start. This is the most dreadful problem when your computer won’t boot. There are ample of reasons that might keep your PC from away from opening up. If you press the power button and nothing happens, it is certain that it is facing power issue. This means that electricity is not getting to the computer.
Determine Which Issue your Desktop is experiencing
As you press the bower button to turn the system on, it goes through certain processes to get you into the Windows. However, if it does not respond in the expected manner, the first thing that comes into your mind is troubleshooting and identifying what failure is occurring.
When your system does not respond when you turn on, it might be the power issue, software or hardware issue. The perfect way to decide is by paying close attention to the diagnostic indicators on the PC. When we talk about the diagnostic indicators, they mainly vary from system to system. Following are some of the issues that might relate to the failure you are experiencing. The following conditions might hinder your computer from turning on.
• No Power
• No Boot
• No Video
• No Post
No Power
No power means that either the system is not receiving any power or the power is not appropriately distributed in the PC. It is really very complicated to analyze what is the major case of the issue. If you are facing no power issue, try a restart and perform the following tips.
• Make sure that all the cables are safe in their connection.
• Bypass any power strip or battery back-up and attach the power cable directly into the wall outlet.
• Eliminate all the unwanted items connected to the computer.
• Make sure that all the changeable media is detached from the system or any of the printer connected to the system.
• Check the PSU by depressing the built in self-test button and test if the LED lights turn on.
• Unplug the PC and plug some other thing to check if that works.
• If you notice any hardware or software changes just before the issue, reverse the changes and check again.
No Boot
It means problem of booting to the operating system. Troubleshoot in the following ways to get the problem fixed.
• Check that each of the cables is secured in their connection.
• Take out all the undesirable items attached to the computer including the external hard drives, flash drives, printers etc.
• Remove all the removable media from the printer and system.
• Reseat the location of the hard drive and ensure that all the cables are protected.
• If any hardware or software change is required, rear the changes and test again.
• Once the above tests are done, try to restart the system.
No Video
No video can be defined as getting no visual response on the LCD or monitor. The system might be functioning but nothing is displayed on the screen. Conduct the following tips to get it fixed.
• Check the power cable. Ensure that the monitor VGA cable is connected to the back of the system into the 15 pin connector.
• Check the power cable. Ensure that the plugged in data cable is getting appropriate power.
• Check the LED status. If the monitor feature a light, however, the status light is flashing or is orange, ensure that the monitor is not in the suspend mode either by pressing a key on the keyboard or moving the mouse.
• Make sure the monitor settings are correct.
• Test the hardware settings. If the system beeps abnormally, the system might be facing hardware issue.
No Post
Post means Power on Self-Test. This includes a series of checks the system performs while turning on and further makes sure that everything is performing and set for the operating system to load. If your computer is facing no post issue, try out the following steps.
• Remove any hardware attached.
• Remove any USB devices or disks.
• Detach the external devices.
• Recognizing the beep code.
• Ensure that all the fans are running appropriately in the computer.
• Make sure that all cables are properly connected.
• Disconnect all the drives.
• Remove the RAM from the motherboard and turn the computer on.
• Try to power cycle the PC.
• Also reseat the CPU by disconnecting and reconnecting it back to the computer.
All the above, if do-it-yourself method is not your cup of coffee, then appoint Fixmi. It is one of the top notch service providers when it comes to solving your computer related issues. The technicians of the firm leaves no stone unturned to diagnose the problem correctly or repair the damaged component or get it replaced immediately. The 90 days warranty scheme offers complete satisfaction to the customer. For instance, if the repaired device shows any kind of defect, you can get in touch with Fixmi and the issue would be fixed immediately.
Henceforth, try out the aforesaid steps or approach Fixmi to fix the problem of your PC not turning on.
Determine Which Issue your Desktop is experiencing
As you press the bower button to turn the system on, it goes through certain processes to get you into the Windows. However, if it does not respond in the expected manner, the first thing that comes into your mind is troubleshooting and identifying what failure is occurring.
When your system does not respond when you turn on, it might be the power issue, software or hardware issue. The perfect way to decide is by paying close attention to the diagnostic indicators on the PC. When we talk about the diagnostic indicators, they mainly vary from system to system. Following are some of the issues that might relate to the failure you are experiencing. The following conditions might hinder your computer from turning on.
• No Power
• No Boot
• No Video
• No Post
No Power
No power means that either the system is not receiving any power or the power is not appropriately distributed in the PC. It is really very complicated to analyze what is the major case of the issue. If you are facing no power issue, try a restart and perform the following tips.
• Make sure that all the cables are safe in their connection.
• Bypass any power strip or battery back-up and attach the power cable directly into the wall outlet.
• Eliminate all the unwanted items connected to the computer.
• Make sure that all the changeable media is detached from the system or any of the printer connected to the system.
• Check the PSU by depressing the built in self-test button and test if the LED lights turn on.
• Unplug the PC and plug some other thing to check if that works.
• If you notice any hardware or software changes just before the issue, reverse the changes and check again.
No Boot
It means problem of booting to the operating system. Troubleshoot in the following ways to get the problem fixed.
• Check that each of the cables is secured in their connection.
• Take out all the undesirable items attached to the computer including the external hard drives, flash drives, printers etc.
• Remove all the removable media from the printer and system.
• Reseat the location of the hard drive and ensure that all the cables are protected.
• If any hardware or software change is required, rear the changes and test again.
• Once the above tests are done, try to restart the system.
No Video
No video can be defined as getting no visual response on the LCD or monitor. The system might be functioning but nothing is displayed on the screen. Conduct the following tips to get it fixed.
• Check the power cable. Ensure that the monitor VGA cable is connected to the back of the system into the 15 pin connector.
• Check the power cable. Ensure that the plugged in data cable is getting appropriate power.
• Check the LED status. If the monitor feature a light, however, the status light is flashing or is orange, ensure that the monitor is not in the suspend mode either by pressing a key on the keyboard or moving the mouse.
• Make sure the monitor settings are correct.
• Test the hardware settings. If the system beeps abnormally, the system might be facing hardware issue.
No Post
Post means Power on Self-Test. This includes a series of checks the system performs while turning on and further makes sure that everything is performing and set for the operating system to load. If your computer is facing no post issue, try out the following steps.
• Remove any hardware attached.
• Remove any USB devices or disks.
• Detach the external devices.
• Recognizing the beep code.
• Ensure that all the fans are running appropriately in the computer.
• Make sure that all cables are properly connected.
• Disconnect all the drives.
• Remove the RAM from the motherboard and turn the computer on.
• Try to power cycle the PC.
• Also reseat the CPU by disconnecting and reconnecting it back to the computer.
All the above, if do-it-yourself method is not your cup of coffee, then appoint Fixmi. It is one of the top notch service providers when it comes to solving your computer related issues. The technicians of the firm leaves no stone unturned to diagnose the problem correctly or repair the damaged component or get it replaced immediately. The 90 days warranty scheme offers complete satisfaction to the customer. For instance, if the repaired device shows any kind of defect, you can get in touch with Fixmi and the issue would be fixed immediately.
Henceforth, try out the aforesaid steps or approach Fixmi to fix the problem of your PC not turning on.
Post a Comment