![]() |
PC Drive Install |
• It is recommended to uncover the case cover. Always ensure you have opened the IDE slots or you have altered the IDE cable. Always make sure that you have got enough space for PC drive install.
• Subject to the devices that are already installed on secondary and master IDE slots, you are required to alter the jumpers to slave the machine that has been set to the master. You always want to become the master unless and until there is some other device attached to the cable.
• Next, the hard drive should be placed properly on the bay. Make sure you place it with the silver side of the device on the top with the connector facing towards the motherboard so that you are free to plug it in. Get spare power cord from the power supply and get it connected to the hard drive. Plug in the IDE cable into the hard drive and shut off the case.
• On the basis of the operating system, you are required to boat from the CD and generate a partition and further it is essential to format it if you are Windows 98 user.Moreover, if you are using Windows 2000 or Windows XP, you carry on the process after you restart the system.Later, move to computer manager and select Disk manager on the left hand side, click on new drive and this is where you develop the new partition and format it for use.
• If you want to use it as your primary hard drive then it is essential to get the software in order to use it as clone. This software features the efficiency to make a similar drive with all the drivers and software identical to your old drive, difference with space.
Now, if you feel that you are not the master, approach the best firm with impeccable knowledge in the related field. Among the countless firms available, fixmi acquires a top notch position. So, get the help of the most talented professionals and enjoy high quality PC Drive Install service.
Post a Comment